Ngā Āheinga PCB
Ko te awhe katoa o ngā ratonga whakanao PCB me ngā ratonga whakaminenga hei whakauru i ō hiahia āheinga papa iahiko tā katoa.
Kua whakamōhiotia e Victory ngā taputapu whakanao PCB o te ao me ngā taputapu whakamātautau tiketike. I whāngaia e mātau he tauira whakahaere pūtaiao hai hanga i tētahi āheinga whakanao tukanga kaha, ārahi hoki.
Taputapu Whakanaonga Arā Atu Anō
Mīhini AVI
Raina Mask TaeAunoa Katoa
Atahanga Hāngai Taiaho
Optima AOI
taiwhanga ōkiko
Raina PTH
Mīhini ine-rua
200,000/min tere Drilling Machine
Taputapu Rorohiko
E wātea ana te katoa i roto i tā mātou tukanga. Ka taea e te wikitōria te hoahoa me te tukatuka i ngā tukanga motuhake pēnei i te whakahaere i te mira hōhonu, te hāwhe rua, te pēhanga whāranu me ērā atu mea.
| Ngā tūemi | Ngā Āheinga Whakanaonga |
| Rawa | CEM-3,FR-4(Normal to High Tg), High CTI FR-4, Polyimide(PI), Aluminum Base, Toro |
| Mutunga mata | HAL, HASL Leadfree, ENIG,Chem Tin, OSP,Gold Finger, Immersion Silver |
| Min.Core mātotoru | 2.36mil/0.06mm |
| Momo Prepreg | 1080, 2116, 7628, 106, 3313, 2165, 1500. |
| Rahi o te poari mōrahi | 22.8X47.2inch/580X1200mm |
| Te mātotoru o te kōpae | Min. kapa pūtake 1/4Oz |
| Mōrahi. kapa pūtake 10Oz | |
| Min.board mātotoru | 2- Layer 0.2mm/8mil |
| 4-Layer 0.35mm/14mil | |
| 6-layer 0.60mm/24mil | |
| 8-Layer 0.8mm/32mil | |
| 10-Layer 1.0mm/40mil | |
| 12-Layer 1.2mm/47mil | |
| 14-Layer 1.4mm/55mil | |
| 16-Layer 1.6mm/63mil | |
| Min.line whānui/mokowā | 3/3mil ngā riu ā roto, waho ake hoki |
| Rahi rua Min | 4mil/0.1mm |
| Te mātotoru o te pātū PTH | ≧25μm |
| Momo Blind, tanumia mā te | II, III, IV, V, VI...... |
| Min. kāpō/buried mā te | 0.1mm/4mil |
| Min.space i waenganui i ngā māka me ngā riu | 0.2mm/8mil |
| Min. mokowā i waenganui i te BGA ki ngā riu | 0.076mm/3mil |
| Min. Solder hīpoki arawhiti | 0.1mm/4mil |
| Min. BGA | 0.2mm |
| Mōrahi.board mātotoru | 6.0mm/236mil |
| Mōrahi ōwehenga aronga | 12:01:00 |
| AOI (Whakaaronga Ōmata Aunoa) | Rahi mōrahi.ka taea: 685X685mm |
| Rahi mōrahi.inspect: 620X620mm | |
| Mōrahi. mātotoru: 3.20mm(126mil) | |
| Min. mātotoru: 0.06mm(2.36mil)-core | |
| Min. whānui/gap: 3mil/3mil | |
| Hoahoa me te Whakamātautau | Whānui riu 3mil, whānui riu 3mil/gap, tauaha IPC tauaha 2/IPC tauaha 3,Flying probe/tooling test, Differential impedance, TDR test, te arotakenga ōmata aunoa |
| Tolerance mātotoru o te Poari | ±0.10mm(4/6layers) |
| ±0.13mm(8/10layers) | |
| ±0.15mm(12/14/16layers) | |
| PTH dia. Tolerance | ±0.075mm/3mil(Standard), ±0.05mm/2mil(Advanced) |
| NPTH dia. Tolerance | ±0.05mm/2mil(I runga i te horahanga laminate) |
| ±0.03mm(I runga i te rohe whenua) | |
| Tauwāhi Hole Tolerance | ±0.075(Standard) ±0.05mm(Advanced) |
| ±0.13(2 te rua wiri ki te tauwāhi rua wiri 1 (mm)) | |
| Te manawanui rahi o te kairau | ±0.075mm(papa mātotoru papa≤1.0mm) |
| ±0.10mm(papa mātotoru papa>1.00mm) | |
| V-CUT E noho ana i te manawanui mātotoru | ±0.10mm(Standard), ±0.076mm(Arā Atu Anō) |
| Tautoru hīpoki Ka taea te whakamahi | ≥8mil(0.2mm) |
| Ōritetanga ā-roto | >1012Ω |
| Mā te Resistance rua | <300Ω |
| Pakaru o nāianei | 10A |
| Peel Strength | 1.4N/mm |
| S/M Abrasion | >6H |
| Hau wera | 288°C 20Sec |
| Whakamātau Voltage | 20-300V |
| Mana Impedance | (50Ω-100Ω)±10%(Standard)、 (50Ω-100Ω)±7%(Advanced) |
Ngā Wā Kaiārahi Tukunga PCB
|
Apa
Horahanga
|
1m² | 1m²≤S≤3m² | 3m²≤S≤5m² | Tere |
| 2L | 4 rā | 6 rā | 7 rā | 1 rā |
| 4L | 6 rā | 7 rā | 8 rā | 2 rā |
| 8L | 6 rā | 7 rā | 9 rā | 2 rā |
| 10L | 9 rā | 10 rā | 13 rā | 5 rā |